Vol. 26 No. 1 (2020): Modeling and simulation in metallurgical and materials engineering

Modeling and simulation in metallurgical and materials engineering

• Intensification of liquid steel active flow volume in one-strand tundish using a modified ladle shroud

  Michał Bartosiewicz, Adam Cwudziński

  1-14

  • PDF/HTML

• Matrix design of a novel ductile cast iron modified by W and Al: A comparison between thermodynamic modeling and experimental data

  Gülşah Aktaş Çelik, Maria-Ioanna T. Tzini, Şeyda Polat, Şaban Hakan Atapek, Gregory N. Haidemenopoulos

  15-29

  • PDF/HTML

• Voronoi diagram based simulation and experimental validation of austenite in C22 and C35 steels

  Sanchu S, Biju N, Prof., V. N.N. Namboothiri

  31-42

  • PDF/HTML

• The effect of non-metallic inclusion size and orientation on tensile properties of stainless steel (simulation and experiment)

  Peyman Ahmadian, Mahdi Taghizadeh

  43-55

  • PDF/HTML

• Modeling and optimization of flank wear and surface roughness of Monel-400 during hot turning using artificial intelligence techniques

  M. Hanief, M. S. Charoo

  57-69

  • PDF/HTML

• Numerical study on characteristics of flow and thermal fields around rotating cylinder

  Kamel Korib, Mohamed ROUDANE, Yacine Khelili

  71-86

  • PDF/HTML

• Buoyancy-driven flow in annular space from two circular cylinders in tandem arrangement

  Houssem Laidoudi

  87-102

  • PDF/HTML

• Three-dimensional numerical study of thermal exchanges in different geometry sections of mini-channels using three different nanoparticles

  Kamel Chadi, Nourredine Belghar, Belhi Guerira, Aissam Messaoudi

  103-119

  • PDF/HTML

• Influence of types of nanoparticles, nanoparticles volume concentration and types of cooler metals on the heat transfer in a mini-channel cooler

  Kamel Chadi, Nourredine Belghar, Belhi Guerira, Zied Driss

  121-135

  • PDF/HTML

• Simulation of velocity profile inside turbulent boundary layer

  Karlo Raić

  137-141

  • PDF/HTML