Sandwich composite of aluminum alloy and magnesium alloy through accumulative roll bonding technique

Authors

J Aishwarya Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Amrita Vishwa Vidyapeetham, India
M. Nithin Kumaar Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Amrita Vishwa Vidyapeetham, India
Vaira Vignesh Ramalingam Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Amrita Vishwa Vidyapeetham, India
M Govindaraju Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Amrita Vishwa Vidyapeetham, India

DOI:

https://doi.org/10.30544/761

Abstract

Aluminum and magnesium alloys are lightweight materials with outstanding technical uses. Due to their combined qualities, composites built of aluminum and magnesium alloys have surpassed the utilization of these elements individually. Accumulative Roll Bonding was used to create a three-layered sandwich composite structure made of Al-alloy/Mg-alloy/Al-alloy. The composite structure's microstructure and mechanical characteristics were studied. A fine-grained AZ31 layer was formed, according to the microstructural study. At the Al-alloy/Mg-alloy contact, a diffusion layer was also seen. On the broken surface, fractography exhibited both ductile and brittle failure characteristics.

References

F. C. Campbell, Lightweight Materials-Understanding the Basics, https://www.asminternational.org/documents/10192/1849770/05355G_Sample.pdf, Accessed 28 May 2021.

M. Govindaraju, U. Chakkingal, P. R. Kalvala, R. Vaira Vignesh, K. Balasubramanian: J Mater Eng Perform, 29 (2020) 3172-3182.

R. Vaira Vignesh, R. Padmanaban, and M. Govindaraju: Bull Mater Sci, 43 (2020) 1-12.

R. Vaira Vignesh, R. Padmanaban, and M. Govindaraju: Silicon, 12 (2020) 1085-1102.

E. E. R. Energy, Lightweight Materials for Cars and Trucks, https://www.energy.gov/eere/vehicles/lightweight-materials-cars-and-trucks, Accessed 28 May 2021

N. Rahulan, S. Gopalan, and S. Kumaran: Mater Today: Proc, 5 (2018) 17935-17943.

V. Pamula, K. P. Kalyan, R. V. Vignesh, and M. Govindaraju: Mater Today: Proc, 45 (2021) 7816-7821.

G. V. Kumar, C. Rao, and N. Selvaraj: Composites, Part B 43 (2012) 1185-1191.

A. Graf: Materials, Design and Manufacturing for Lightweight Vehicles, Elsevier, 2021, 97-123.

K. Sivanur, K. Umananda, and D. Pai, in AIP Conference Proceedings Eds. M Satyanarayana Gupta, TVK Gupta and N Kishore Nath, AIP Publishing LLC 2021 p. 020032.

V. V. Ramalingam, P. Ramasamy, M. D. Kovukkal, and G. Myilsamy: Met Mater Int, 26 (2020) 409-430.

D. S. Kumar, C. T. Sasanka, K. Ravindra, and K. Suman: Am J Mater Sci Technol, 4 (2015) 12-30.

D. Kumar, R. K. Phanden, and L. Thakur: Mater Today: Proc 38 (2021) 359-364.

G. Ghongade, K. P. Kalyan, R. V. Vignesh, and M. Govindaraju: Mater Today: Proc, 46 (2021) 4520-4526.

Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater, 47 (1999) 579-583.

H. Pirgazi, A. Akbarzadeh, R. Petrov, and L. Kestens: Mater Sci Eng A, 497 (2008) 132-138, 2008.

D. Rahmatabadi, M. Tayyebi, R. Hashemi, and G. Faraji: Int J Miner Metall Mater, 25 (2018) 564-572.

M. D. Gholami, D. Rahmatabadi, T. Shojaee, R. Hashemi, and B. Mohammadi: Mater Res Express, 8 (2021) 1-12.

H. Jafarian, M. Mahdavian, S. Shams, and A. Eivani: Mater Sci Eng A, 805 (2021) 140556.

D. Rahmatabadi, M. Pahlavani, M. D. Gholami, J. Marzbanrad, and R. Hashemi: J Mater Res Technol, 9 (2020) 7880-7886.

Yang Wang, Yang Liao, Ruizhi Wua, Nodir Turakhodjaev, Hongtao Chen, Jinghuai Zhang, Milin Zhanga, Sharofuddin Mardonakulov: Mater Sci Eng A, 787 (2020) 139494.

G. F. V. Voort: ASM Handbook Volume 9: Metallography and Microstructures, ASM International, 2004, 1058-1060.

M. Abbasi and S. A. Sajjadi: J Mater Eng Perfe, 27 (2018) 3508-3520.

N. Hansen, X. Huang, R. Ueji, N. Tsuji: Mater Sci Eng A, 387 (2004) 191-194.

D. Rahmatabadi, R. Hashemi, B. Mohammadi, T. Shojaee: Mater Sci Eng A, 708 (2017) 301-310.

D. Rahmatabadi, A. Shahmirzaloo, R. Hashemi, and M. Farahani: Mater Res Express, 6 (2019) 086542.

K. Wu, H. Chang, E. Maawad, W. Gan, H. Brokmeier, and M. Zheng: Mater Sci Eng A, 527 (2010) 3073-3078.

D. Rahmatabadi and R. Hashemi: Int J Mat Res, 108 (2017) 1036-1044.

Downloads

HTML/PDF

Published

2022-06-30

How to Cite

Aishwarya, J, M. Nithin Kumaar, Vaira Vignesh Ramalingam, and M Govindaraju. 2022. “Sandwich Composite of Aluminum Alloy and Magnesium Alloy through Accumulative Roll Bonding Technique”. Metallurgical and Materials Engineering 28 (2):257-68. https://doi.org/10.30544/761.

Download Citation

Issue

Vol. 28 No. 2 (2022)

Section

Composite materials - novelties in manufacturing and application

License

Copyright (c) 2022 J Aishwarya, M. Nithin Kumaar, Vaira Vignesh Ramalingam, M Govindaraju

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their published articles online (e.g., in institutional repositories or on their website, social networks like ResearchGate or Academia), as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Except where otherwise noted, the content on this site is licensed under a Creative Commons Attribution 4.0 International License.