Investigating the Fatigue Behaviour of High-Temperature Annealed LPBF Ti6Al4V(ELI) Tested at Elevated Temperatures

Authors

  • Tumelo Moloi
  • Thywill Cephas Dzogbewu

Keywords:

Fatigue behaviour, Elevated temperatures, LPBF Ti6Al4V(ELI), Fracture surface, Porosity.

Abstract

Though failure of engineering materials has been studied extensively, the prevention of failure is never guaranteed. In many high-temperature industries, engineering structures often experience fatigue failure due to temperature fluctuations. The present study aims to investigate the effect of elevated temperatures on the fatigue life of Ti6Al4V(ELI). In this study, an LPBF EOSINT M290 machine was used to manufacture test specimens. The results obtained showed that elevated temperatures above room temperature, till 325 °C, have an insignificant effect on the fatigue life of Ti6Al4V(ELI) specimens

References

Proteau A, Guittonny M, Bussière B. Impact of roots on the hydrogeological properties of silty soil covers. Canadian Geotechnical Journal, 2024, 61(8):116-132.

Zhang X, Cao W, Zhang X. Experimental study on mechanical and hydraulic properties of xanthan gum improved low liquid limit silty soil. Scientific Reports, 2024, 14(1):1112-1135.

Yu Y, Li J, Peng W, Chen Y, Chen C, Luo E, Liu E. Experimental Study on Unloading Mechanical Properties of Deep-Buried Silty Soil. International Journal of Civil Engineering, 2025, 23(4):655-670.

Orioli M A, Costa W G S, Baldin C R B. Silty soil resilient modulus stabilised with cement and recycled aggregate. International Journal of Pavement Engineering, 2024, 25(1): 2378334.

Li H, Ma W, Wang K, Feng Y, Zhang S, Zhou S, Zhang H. Preparation of a Low-Cement-Content Silty Soil Stabilizer Using Industrial Solid Wastes. Applied Sciences-Basel, 2024, 14(1):13-26.

Govindasamy P, Taha M R. Changes in Chemical Concentration of Silty Clay Added with Lime and Nanolime. Advanced Structured Materials, 2024,11(2):85-100.

Shi Y, Li S, Zhang T, Liu J, Zhang J. Compaction and shear performance of lime-modified high moisture content silty clay. Case Studies in Construction Materials, 2024, 21:e03529.

Akhtar S, Li B. Experimental study of mechanical behaviours of lime-treated Quebec silty clay soils under freeze–thaw cycles. Environmental Geotechnics, 2025, 12(7):499-516.

Wang S, Hui H, Guo P C Z. Permeability and strength characteristics of silty sands grouted with cement and polymer. Acta Geotechnica: An International journal for Geoengineering, 2024, 19(4):2125-2143.

Wang Y Z, Chen F Y, Gao Y, Zhuang M L, Ge F H, Tang Z J. Unconfined Compressive Strength Optimization of Industrial Solid Waste-Based Soil Stabilizers. Strength of Materials, 2025, 57(6):1357-1364.

Marjadi H K, Jang J. Compressional behavior of fine-grained soils: Clastic and biogenic silty soils. Geomechanics and Engineering, 2025, 41(1):71-82.

Tomasello G, Porcino D D. Energy-Based Pore Pressure Generation Models in Silty Sands under Earthquake Loading. Geosciences, 2024, 14(6):166-179.

Guo H, Sun Q, Yuan C, Li X, Zhao Y. Experimental investigation on the physical and mechanical properties of silty clay enhanced by microencapsulated phase change materials. Case Studies in Construction Materials, 2024, 20(c):e03151.

Xiao Y, Hu J, Shi J, Zhang L, Liu H. Undrained cyclic responses of biocemented calcareous silty sand. Acta Geotechnica, 2024, 19(10):256-282.

Shaji S, Gade V K, Sundaram B, Bande G R. Evaluating the Effectiveness of Xanthan Gum Biopolymer as a Soil Stabiliser. Indian Geotechnical Journal, 2025, 55(5):2909-2919.

Ma Y, Dong X, Wang Z, Liu T, Ma W. Mechanical behavior and erosion resistance of desert soil stabilized with guar gum biopolymer. Bulletin of Engineering Geology and the Environment, 2025, 84(11):1325-1342.

Hamza M, Khan M I. Mechanical and hydraulic improvement of highly organic soil using Xanthan Gum: A strength-microstructure approach. Geomechanics and Engineering, 2025, 43(1):13-26.

Mohamed A M O, O'Kelly B C, Soltani A. Xanthan Gum-Soil Interactions. Green Energy and Technology, 2024, 11(2):99-123.

Baghdir B, Abed Y, Feia S, Denine S, Beyaz T, Cherifi A. Effect of Xanthan gum biopolymer combined with fibre as soil- stabilization binder of dune sand in Southern Algeria. Geomechanics and Engineering, 2024, 39(2):115-127.

GB/T 50123-2019. Standard for geotechnical testing method. Bejjing, China: Ministry of Housing and Urban-Rural Development, PRC; 2019.

Downloads

Published

2026-06-15

How to Cite

Moloi, Tumelo, and Thywill Cephas Dzogbewu. 2026. “Investigating the Fatigue Behaviour of High-Temperature Annealed LPBF Ti6Al4V(ELI) Tested at Elevated Temperatures”. Metallurgical and Materials Engineering, June, 48-56. https://metall-mater-eng.com/index.php/home/article/view/1955.

Issue

Section

Research