TY - JOUR AU - Markoli, Boštjan AU - Delijić, Kemal AU - Å trekelj, Neva AU - Naglič, Iztok PY - 2013/12/31 Y2 - 2024/03/29 TI - Room temperature deformation of in-situ grown quasicrystals embedded in Al-based cast alloy JF - Metallurgical and Materials Engineering JA - Metall Mater Eng VL - 19 IS - 4 SE - DO - UR - https://metall-mater-eng.com/index.php/home/article/view/179 SP - 329-336 AB - An Al-based cast alloy containing Mn, Be and Cu has been chosen to investigate the room temperature deformation behavior of QC particles embedded in Al-matrix. Using LOM, SEM (equipped with EDS), conventional TEM with SAED and controlled tensile and compression tests, the deformation response of AlMn2Be2Cu2 cast alloy at room temperature has been examined. Alloy consisted of Al-based matrix, primary particles and eutectic icosahedral quasicrystalline (QC i-phase) and traces of Θ-Al2Cu and Al10Mn3. Tensile and compression specimens were used for evaluation of mechanical response and behavior of QC i-phase articles embedded in Al-cast alloy. It has been established that embedded QC i-phase particles undergo plastic deformation along with the Al-based matrix even under severe deformation and have the response resembling that of the metallic materials by formation of typical cup-and-cone feature prior to failure. So, we can conclude that QC i-phase has the ability to undergo plastic deformation along with the Al-matrix to greater extent contrary to e.g. intermetallics such as Θ-Al2Cu for instance. ER -