Dynamic Analyses of Two-Dimensional Functionally Graded Timoshenko Beam using Finite element Method

Authors

Dhyai Hassan jawad Aljashaami University of Babylon, College of Engineering/ Al-Musayyab, Department of Automobiles Engineering, Iraq.
Mohammed A Al-Shujairi University of Babylon, College of Engineering, Department of Mechanical Engineering, Iraq.
Ameen M. Al Juboori Al-Mustaqbal University Collage, Biomedical Engineering Department, Babylon, Iraq.
Salwan Obaid Waheed Khafaji University of Babylon, College of Engineering, Department of Mechanical Engineering, Iraq.
Mohammed Jawad Aubad University of Babylon, College of Engineering, Department of Mechanical Engineering, Iraq.

DOI:

https://doi.org/10.56801/MME985

Keywords:

elasticity modulus ratio (Eratio); free-clambed boundary.

Abstract

In this work, dynamic analyses of a functionally graded beam are presented. The governing equations of the beam is found based on the displacement field defined by Timoshenko beam theory, then solved by using finite element method based on Hamilton’s principle. The beam is assumed to be free-clambed boundary condition (F-C). The PL index is used for describing the distribution of the beam properties in both transverse and longitudinal directions. A parametric study is accomplished to investigate effect of several parameters on the natural frequency, mode shapes and transient response of the beam., such as the PL indexes (nx and nz) for x and z axis, respectively, and the elasticity modulus ratio (Eratio). To valid the present results and current mathematical formulation, some of the findings are compared with another research. A good agreement is noticed. It is noted that the response of the beam is more sensitive to the variations of the PI in the longitudinal axes than that corresponding in the transverse one. For specific design requirements, the dynamic response of the beam can be adjusted by chose a proposal indexes and modulus ratios.

References

Sankar, B.V., An elasticity solution for functionally graded beams. Composites Science and Technology, 2001. 61(5): p. 689-696.

Aubad, M.J., et al., Modal analysis and transient response of axially functionally graded (AFG) beam using finite element method. Materials Research Express, 2019. 6(10): p. 1065g4.

Şimşek, M. and M. Al-Shujairi, Static, free and forced vibration of functionally graded (FG) sandwich beams excited by two successive moving harmonic loads. Composites Part B: Engineering, 2017. 108: p. 18-34.

Al-shujairi, M. and Ç. Mollamahmutoğlu, Dynamic stability of sandwich functionally graded micro-beam based on the nonlocal strain gradient theory with thermal effect. Composite Structures, 2018. 201: p. 1018-1030.

Khafaji, S.O.W., M.A. Al-Shujairi, and M.J. Aubad, Transient analysis of transversely functionally graded Timoshenko beam (TFGTB) in conjunction with finite element method. Archive of Mechanical Engineering, 2020. 67.

Karamanli, A., Static behaviour of two-directional functionally graded sandwich beams using various beam theories. New Trends in Mathematical Sciences, 2017. 5(2): p. 112-147.

Karamanlı, A., Free vibration analysis of two directional functionally graded beams using a third order shear deformation theory. Composite Structures, 2018. 189: p. 127-136.

Wang, Z.-h., et al., Free vibration of two-directional functionally graded beams. Composite structures, 2016. 135: p. 191-198.

Şimşek, M., Buckling of Timoshenko beams composed of two-dimensional functionally graded material (2D-FGM) having different boundary conditions. Composite Structures, 2016. 149: p. 304-314.

Karamanlı, A. and T.P. Vo, Size dependent bending analysis of two directional functionally graded microbeams via a quasi-3D theory and finite element method. Composites Part B: Engineering, 2018. 144: p. 171-183.

Karamanlı, A., Elastostatic analysis of two-directional functionally graded beams using various beam theories and Symmetric Smoothed Particle Hydrodynamics method. Composite Structures, 2017. 160: p. 653-669.

Şimşek, M., Bi-directional functionally graded materials (BDFGMs) for free and forced vibration of Timoshenko beams with various boundary conditions. Composite Structures, 2015. 133: p. 968-978.

Yas, M. and M. Heshmati, Dynamic analysis of functionally graded nanocomposite beams reinforced by randomly oriented carbon nanotube under the action of moving load. Applied Mathematical Modelling, 2012. 36(4): p. 1371-1394.

Deng, H. and W. Cheng, Dynamic characteristics analysis of bi-directional functionally graded Timoshenko beams. Composite Structures, 2016. 141: p. 253-263.

Tang, Y. and Q. Ding, Nonlinear vibration analysis of a bi-directional functionally graded beam under hygro-thermal loads. Composite Structures, 2019. 225: p. 111076.

Karamanlı, A., Bending behaviour of two directional functionally graded sandwich beams by using a quasi-3d shear deformation theory. Composite structures, 2017. 174: p. 70-86.

Nejad, M.Z., A. Hadi, and A. Rastgoo, Buckling analysis of arbitrary two-directional functionally graded Euler–Bernoulli nano-beams based on nonlocal elasticity theory. International Journal of Engineering Science, 2016. 103: p. 1-10.

Yang, T., et al., Nonlinear bending, buckling and vibration of bi-directional functionally graded nanobeams. Composite Structures, 2018. 204: p. 313-319.

Li, L., X. Li, and Y. Hu, Nonlinear bending of a two-dimensionally functionally graded beam. Composite Structures, 2018. 184: p. 1049-1061.

Nejad, M.Z. and A. Hadi, Non-local analysis of free vibration of bi-directional functionally graded Euler–Bernoulli nano-beams. International Journal of Engineering Science, 2016. 105: p. 1-11.

Su, H., J. Banerjee, and C. Cheung, Dynamic stiffness formulation and free vibration analysis of functionally graded beams. Composite Structures, 2013. 106: p. 854-862.

Lin, Y.-H., Vibration analysis of Timoshenko beams traversed by moving loads. Journal of Marine Science and Technology, 1994. 2(1): p. 4

Downloads

PDF

How to Cite

Dhyai Hassan jawad Aljashaami, Mohammed A Al-Shujairi, Ameen M. Al Juboori, Salwan Obaid Waheed Khafaji, and Mohammed Jawad Aubad. 2023. “Dynamic Analyses of Two-Dimensional Functionally Graded Timoshenko Beam Using Finite Element Method”. Metallurgical and Materials Engineering 29 (1):52-69. https://doi.org/10.56801/MME985.

Download Citation

Issue

Vol. 29 No. 1 (2023)

Section

Research

License

Copyright (c) 2023 Dhyai Hassan jawad Aljashaami, Mohammed A Al-Shujairi, Ameen M. Al Juboori, Salwan Obaid Waheed Khafaji, Mohammed Jawad Aubad

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their published articles online (e.g., in institutional repositories or on their website, social networks like ResearchGate or Academia), as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Except where otherwise noted, the content on this site is licensed under a Creative Commons Attribution 4.0 International License.